John Lewis Belgrave Stripe Fabric
Woven at Herbert Parkinson, part of the John Lewis Partnership. Belgrave Stripe is a stylish stripe suitable for curtains and blinds.
This fabric can also be made up into Roman blinds. To order call 0845 610 0357 or visit one of our shops.
Please have your window measurements and preferred options to hand.
How to order Roman blinds
You can customise your selection with alternative mechanisms and cord positioning. For options, see the image thumbnail above.
To order Roman blinds, please call 0845 610 0357 with your window measurements and preferred options to hand.
Once we've accepted your order and checked the fabric is in stock you should receive your custom-made item/s within 7 days.
Measuring up for Roman blinds:
Use a metal tape measure and make a note of your measurements to the nearest millimetre.
Measuring a blind inside a window recess:
Make sure the recess your blind is going into is not obstructed in any way, so the blind can hang freely when fully extended.
The depth of the recess should be at least 75mm (3 inches) to accommodate the operating mechanism.
Measure the total width from A to B and the length from C to D (see image). To allow for slight variation, measure this width at several points and make a note of the narrowest measurement.
Measuring a blind outside a window recess:
Decide how far you want the fabric to overlap on all sides – we recommend at least 45mm (1 ¾ inches). For roller blinds, add a further 38mm (1 ½ inches) for the winding mechanism
Measure the width from E to F (see image), and the length from G to H
For information, see the image thumbnail above.
Size restrictions: Minimum and maximum widths and drops apply to custom-made items. We'll advise you on these when taking your order.
- John Lewis
- Colour Palette
- Red, Pink & Purple
- Eligible for International Delivery
- Fabric Pattern Repeat
- Fabric Roll Length
- Fabric Width
- Made in the UK
- 100% cotton
- Washing Instructions
- Dry clean only
Delivery in 7 days from our supplier
Our usual refund policy does not apply to made-to-order products, which cannot be returned or exchanged unless faulty.
If you decided to cancel your made-to-order product for any reason, it is unlikely that we could sell it to another customer at full selling price. We will therefore charge a cancellation fee of 20% of the order price.
Neither of the above conditions affect your statutory rights when goods are faulty, or not as described. For more information; see returns and refunds information.
Q & As