Stokke iZi Go Modular ISOFix Base by BeSafe Car Seat Base

The Stokke iZi Go Modular ISOFix Base by BeSafe is a semi-universal Child Safety Seat System that enables you to quickly and safely install your Stokke iZi Go Modular by BeSafe car seat in a car without having to use the car's own seat belts.

The base is easy and secure to attach to the car by locking the base into two anchorage points in the back of the car's seat. A safety indicator signal when the child's car seat is correctly installed in the ISOfix base. No need to use the car's own seat belts. You can remove the car seat by simply pulling the release handle. A height adjustable support leg resting on the car's floor provides stability while limiting rotation of the car seat and absorbing the forces between the base and the floor of the car during an accident.

The Stokke iZi Go Modular by BeSafe car seat fits directly onto all Stokke Strollers, making the transition from car to stroller as easy as click and go!

Please note: Due to variations in the angle of car seats in various car models, and also due to the fact that the ISOfix anchors are fitted very low in some car models, we encourage all customers to try the base in the relevant car prior to purchase. Such pre-purchase test should preferably be conducted with the child in the car seat, to ensure that your child is seated comfortably in your specific car model.

Safety:

• Under no circumstances should a rearward-facing car seat be used on a passenger seat where there is an active airbag.
• Correct fitting of all car seats and boosters is of paramount importance in making them the most effective in the event of an accident. Not all car seats fit all cars and it is important to check for fitting suitability on all cars you intend to fit the seat to, as well as re-checking if you change your car.
• Always read the instruction booklet which comes with your car seat to achieve a safe and correct fitting, retaining the guide for future reference. We recommend fitting your car seat in advance of first using it.
• We recommend that babies shouldn't be left in car seats (infant carriers) for prolonged periods.

Suitability:

• Please make sure that you check the car seat you choose is suitable for your car before ordering. This can be done in store with a Partner or on the car seat manufacturer's website.
• Some of our shops offer a car seat fit test, where a Nursery advisor will test the display model in your car to check that it will fit properly. Please contact your local shop to see if this service is available. Alternatively, please contact the car seat manufacturer who will be able to advise whether their model will be suitable for your car.
• We also offer in-store and virtual appointments so you can access our All Things Baby services at a time and place to suit you. Click here to book your appointment.
• Find your nearest department store.

Car seats adhere to strict safety regulations and conform to one of the following two types of seats:

• Height-based seats - These seats adhere to the safety regulation R129. They must be rear-facing until your child is over 15 months old. Your child can use a forward-facing child car seat when they’re over 15 months old. You must check the seat to make sure it’s suitable for the height of your child. i-Size is an enhancement of R129 that makes it easier to confirm your car seat's compatibility with any i-Size approved vehicle - reducing the risk of installing your car seat incorrectly. While all i-Size car seats meet the R129 testing standards, not every R129 car seat is an i-Size compatible seat.
• Weight-based seats - These seats adhere to the R44.04 car seat regulation. The seat your child can use (and the way they must be restrained in it) depends on their weight.

The below table is a rough guide as to how the car seats can relate to a child’s age based on the average child's weight or height depending on the regulation chosen.