SamsungBespoke Jet Bot Combo™+ 3-in-1 Cleaning Robot Vacuum Cleaner, Satin Grey

All-in-One Clean Station Steam+ with Steam Sanitisation

The Clean Station Steam+ automatically washes mops at high temperature(1) with steam and water, sanitises them with steam(2) and dries them with 55°C hot air(3). It also empties the dust bag, refills the water tank and recharges the battery.

1. The measured temperature of the steam and water mixture ranges from 50 to 60°C.

2. The measured temperature of the steam is 100°C.

3. The measured temperature of the hot air ranges from 50 to 60℃.

AI Floor Detect

AI Floor Detect identifies different floor types(1). On carpet, the robot lifts the mop pads or detaches them at the station, to avoid cross contamination by the wet mops. It also boosts its suction power for better cleaning efficiency.

1. Based on Samsung's deep learning model trained using predefined set of data and may yield incomplete or incorrect information.

4 Different Cleaning Modes

Simply choose from 4 modes on the SmartThings App(*). For fast cleaning, use the Vacuum and Mop Together mode. If you want hygienic and thorough cleaning, select the Mopping after Vacuuming mode. Or just use the Vacuum-only or Mop-only modes.

dToF LiDAR Sensor

The upgraded LiDAR sensor increases the detection distance by about 36%(1) and, as a result, it widens the size of the detection area by 79%(1). So it improves Jet Bot Combo AI’s path by repeatedly scanning the room to gather distance information and track its location, even in dark areas.

1. Based on internal testing compared to the Jet Bot VR8000 model with a conventional LiDAR Sensor. Scans 360° over a distance ranging from 5cm up to 8m.

No-go-zone & Virtual Wall

Avoid valuable furniture, certain rooms or dangerous objects by manually selecting specific locations on a map in the SmartThings App(*). You can also ensure that only part of a room is off limits using virtual walls. And you can set specific areas to mop or keep dry.

Outstanding Cleaning Performance

Clean your home effectively with advanced cleaning technologies. Dual rotating mop pads spin rapidly at 170rpm for deep cleaning. A Digital Inverter motor creates powerful suction, while a new high-efficiency brush with hair grinder removes hairs that can get tangled on the brush effectively(1).

1. Based on internal testing. Results may vary depending on actual usage conditions.

Voice Recognition

Clean your home with your voice – wherever you are! Using Samsung Bixby(1) embedded in the robot or via a smartphone or smartwatch(2), you can tell Jet Bot Combo AI what to do. You can schedule when it works, start and stop cleaning, instruct it where to clean, empty its dustbin, locate its position and more(*).

1 Bixby may not recognise certain languages and accents/dialects. A Samsung account log-in and data network connection (Wi-Fi or data network) are required

2. This feature is only available on certain Samsung smartwatches that are connected to the Galaxy Wearable App and when using the SmartThings App on the smartwatches to control devices. Supported products: Gear S3/S4/Sports, Watch, Watch Active/Active2, Watch3, Watch4, Watch4 Classic, Watch5, Watch5 Pro, Watch6, Watch6 Classic.

New High-efficiency Brush with Hair Grinder

Remove hairs, including pet hair, on carpets and floors effectively(1). A newly designed High-efficiency Brush includes Samsung’s patented Hair Grinder. It collects hair in the centre and then cuts it up finely, so it can be sucked out easily, which prevents tangles and makes maintenance easier.

1. Based on internal testing. Comparing the hair removal, pet hair entanglement and suction performance it offers an 880% improvement compared to a brush without a hair grinder: after being used for 30 minutes, there is 0.44g less hair on the brush with the hair grinder compared to 0.05g less hair on the brush without the hair grinder. Results may vary depending on actual usage conditions.

Stained Area Deep Cleaning

Make sure stains are cleaned thoroughly. Stained Area Deep Cleaning uses object recognition technology to identify stained spots on a floor(1). After finishing the rest of the cleaning, it re-cleans the stained area with mop pads, which are heated with steam and water at the Clean Station Steam+..

1. A stained area is defined as a solid, coloured and opaque spot, such as a dried juice, with a size of 4cm x 4cm or larger. Stained area identification may be affected by the size of the stain or the environmental conditions of the floor, such as the floor pattern. Stained Area Recognition needs to be activated beforehand via the SmartThings App. Requires SmartThings App. Available on Android and iOS devices. A Wi-Fi connection and Samsung account are required.

Steam Sanitisation

When the robot vacuum returns to the Clean Station Steam+ after mopping, high-temperature steam is sprayed onto the mop pads. It reduces up to 99.99% of harmful bacteria(1) to keep them sanitary and reduce unpleasant odours.

1. Based on testing by Intertek using Wash the Mop course, eliminates 99.99% of Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. Not supported in the USA. Results may vary depending on the actual usage conditions.

Auto Refill

During cleaning, if the water tank in the robot vacuum cleaner becomes empty, it detects it and returns to the Clean Station Steam+ to automatically refill it. So it always has enough clean water to mop your whole home.

App Control

Using the SmartThings App(*) you can choose from 4 cleaning modes and view a detailed 3D map of your home.

3D Mapping

Jet Bot Combo AI’s LiDAR senses and creates a layout, and converts it into a virtual 3D map, with appliances and furniture. You can see it on the SmartThings App(*) and set areas to clean or avoid.

App Services

You can tell it what to do using Samsung Bixby(1) embedded in the Jet Bot or on a smartphone. It can live stream video to the SmartThings App(2) and alert you if it detects a human(3) or pet(4).

1. Bixby may not recognise certain languages and accents/dialects. A Samsung account log-in and data network connection (Wi-Fi or data network) are required

3. It only recognises a human presence based on generic visual indicators, and cannot identify individual people.

4. Only dogs and cats can be recognised. It only recognises a pet presence based on generic visual indicators, and cannot identify individual pets. The recognition capabilities vary depending on the type, position and posture of animal and the living enivornment.

Software Update via OTN

Take advantage of the latest features and functions without doing anything! New versions of the software that operates Jet Bot Combo AI are automatically downloaded “over the network”(*) and installed. So anyone using Jet Bot Combo AI will always enjoy a newer user experience.

dToF Obstacle Detection

Clean your whole home effectively by detecting obstacles in its way(1). A front sensor quickly detects objects in its route so that the Jet Bot Combo does not run over the obstacles. It can move and clean effectively in complex environments, so it can clean more areas without getting stuck.

1. This function may be affected by an object’s size and shape, or the environmental conditions.

Certified IoT Security

Jet Bot Combo AI has been certified for its security. Awarded the highest Diamond level IoT Security Rating by UL Solutions, its software and user data are protected, and cannot be viewed or leaked by unauthorised users.

* Requires SmartThings App. Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required.